Boltek LD-350, Инструкция по установке и эксплуатации

Страница: 9 / 27

4
10) After clicking the Close button, you may need to click on “Receiver” under the
date and time to connect the LD-350 to the software for the first time.
11) Connect the antenna cable to both the LD-350 and the antenna. Hold the antenna
a few feet from a computer monitor or television. (A laptop computer display may
not produce enough noise.) The LD-350 should detect the radio frequency noise
from the monitor as a constant stream of noises and/or strikes. By moving the
ANT-1 you should be able to find a position that produces strikes. Yellow strike
dots should appear on the map display. Rotating the antenna should change the
strike direction.
12) Mount the antenna away from televisions, computer monitors and other sources of
electrical noise.
LD-350 Connection Diagram