Boltek LD-350, Инструкция по установке и эксплуатации

Страница: 17 / 27

12
Stand Alone Operation
The LD-350 can also be used as a stand-alone lightning detector with or without the need of a
computer. When used with a computer, a real-time lightning display will plot strike locations,
and provide relevant strike information and display and sound any alarms set in the software.
Alternatively, with the LD-350 not connected to a computer, the indicators and internal beeper
can be monitored for approaching storms to determine incoming lightning. It can initially be
connected to a computer to change the default alarm values, and squelch level if they aren't
suitable.
Front Panel Controls
Main Power Button
The main power button disconnects 12V power from the LD-350, the antenna, and the USB
connector.
Note: Lightning Display software will need to be started/restarted after the LD-350 is
powered on, or if there are any power interruptions to the LD-350 during use as strikes may
not display on the screen as they are detected.
Chapter
2