Boltek EFM-100C, Руководство пользователя

Страница: 9 / 11

C O N F I G U R A T I O N
5
Alert Messages
The messages listed in the table below have all ready been pre-programmed into the dialer:
Status Message Modify Command
All Clear ALL CLEAR CUSTOMCL
Fault Clear EFM FAULT CLEAR CUSTOMDL
Fault Active EFM FAULT CUSTOMDH
Red Alarm Active WARN CUSTOMAL
Red Alarm Clear WARN CLEAR CUSTOMAH
Yellow Alarm Active CAUTION CUSTOMBL
Yellow Alarm Clear CAUTION CLEAR CUSTOMBH
To change the message, send the modify command listed with the corresponding status followed by
the message and a full stop.
To customize an alert message, send the following command:
CUSTOM<A/B/C/D><L/H><space><message>.
Ex: CUSTOMAL RED ALARM IS ACTIVE.
The maximum length of the message is 127 characters and must end with a full stop. Use only text
or number characters in the message, and do not place a full stop in the middle of the message as the
rest of characters after the first full stop will be ignored.