Boltek ANT-50, Руководство по установке и эксплуатации

Страница: 20 / 33

C H A P T E R 3 - C O N F I G U R I N G
14
Editing the LRX.ini file
If your LRX-1 receiver was not pre-configured for you at the factory you will need to make a terminal
connection to the LRX-1 and edit the configuration file yourself.
Connect the LRX-1 to a computer using the LRX-1 USB Device. The computer should
automatically load the device driver and create a new virtual COM port.
On your computer open the Windows Device Manager (type Device Manager on the Ask me
anything line)
Open the Ports (COM & LPT) section. You should see at least two USB Serial Ports listed. If you
see more than two unplug and re-plug the USB cable from the LRX-1. The ports that disappear and
reappear belong to the LRX-1.