Boltek ANT-50, Руководство по установке и эксплуатации

Страница: 16 / 33

C H A P T E R 2 - I N S T A L L A T I O N
10
Connectors
Power Connector
Connect the provided 12VDC power supply to the LRX-1 ’s power connector.
Power Switch
This switch controls 12VDC power to the LRX-1. The switch is on when depressed, off when
extended.
Lightning Sensor Connector
Connect the Lightning Sensor cable from the ANT-50 Sensor/GPS.
GPS Connector
Connect the GPS cable from the ANT-50 Sensor/GPS.
USB Device Connector
Connect the LRX-1 to your computer using this USB port for the initial configuration of the Server
List. Once the LRX-1 has successfully connected to at least one control server the Server List can be
updated remotely.
The default entries in the Server List connect the LRX-1 to Boltek LDN servers. If you prefer we can
remotely configure your LRX-1 to point at your servers, or configure the server list before shipment.
Ethernet Connector
This is the Internet connection to the LRX-1. The LRX-1 is configured for DHCP by default.
USB Host Connector
This connector is not normally used.