Bolin Technology BC-9 Series Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 57

Bolin Technology BC-9 Series Скачать руководство пользователя страница 38

38

When you are operating the menu using the infrared remote controller, you cannot set IR- RECEIVE in the
SYSTEM menu to OFF. To set IR- RECEIVE to OFF, use the appropriate VISCA command.

EXPOSURE Menu

The EXPOSURE menu is used to set the items related to exposure.

MODE (Exposure Mode)

FULL AUTO

: Iris, Gain and Shutter Speed can

be set automatically. The exposure is adjusted
automatically using the values set for SLOW
SHUTTER, S. SHUTTER LIMIT, AE SPEED,
GAIN LIMIT, GAIN POINT, HIGH SENSITIVITY,
MAX SPEED, MIN SPEED, BACK LIGHT, SPOT
LIGHT and EX-COMP.

MANUAL

: Adjust the GAIN, electronic shutter

speed (SPEED), iris (IRIS), and HIGH
SENSITIVITY manually.

IRIS PRI

:

Iris Priority mode. The iris can be set

freely by the user. The gain and shutter speed
are set automatically according to the brightness of the subject.
The exposure is adjusted automatically using the values manually set for iris (IRIS), GAIN LIMIT, GAIN
POINT, AE SPEED, MAX SPEED, MIN SPEED, BACK LIGHT, SPOT LIGHT and EX-COMP

SHUTTER PRI

:

Shutter Priority mode. The shutter speed can be set freely by the user, the iris and gain

are set automatically,

according to the brightness of the subject.

The exposure is adjusted automatically using the values manually set for electronic shutter speed
(SPEED), GAIN LIMIT, AE SPEED, BACK LIGHT, SPOT LIGHT and EX-COMP

BRIGHT

: Bright mode.

The bright control function adjusts both

gain and iris using an internal algorithm, according to a
brightness level freely set by the user. Exposure is controlled by
gain when dark, and by iris when bright. As both gain and iris
are fixed, this mode is used when exposing at a fixed camera
sensitivity. When switching from Full Auto or Shutter Priority
Mode to Bright Mode, the current status will be retained for a
short period of time.

The exposure is adjusted automatically using the values
manually set for the bright level (LEVEL) and HIGH SENSITIVITY.

GAIN PRI:

Gain Priority mode.

Adjust with Variable Gain, Auto Iris and Shutter

speed.

Adjust the GAIN, GAIN POINT, AE SPEED, HIGH SENSITIVITY, MAX SPEED, MIN SPEED, BACK
LIGHT, SPOT LIGHT and EX-COMP

MODE MANUAL

GAIN

12dB

SPEED

1/50

IRIS

F2.8

HIGH SENSITIVITY OFF

EXPOSURE MENU: MANUAL

→

EXPOSURE
WHITE BALANCE
DETAIL
PICTURE
GAMMA
NETWORK

PAN TILT ZOOM

SYSTEM

OSD

MODE FULL AUTO

SLOW SHUTTER OFF

S. SHUTTER LIMIT 1/12

AE SPEED 01

GAIN LIMIT 30dB

GAIN POINT OFF

POINT POSITION 0dB

HIGH SENSITIVITY OFF

MAX SPEED 1/1750

MIN SPEED 1/50

BACK LIGHT OFF

SPOT LIGHT OFF

EX-COMP. OFF

EXPOSURE MENU: FULL AUTO

MODE IRIS PRI

IRIS

F2.8

GAIN LIMIT                30dB
GAIN POINT               OFF
  POINT POSITION      0dB
AE SPEED                  01
MAX SPEED

1/1750

MIN SPEED                1/50
BACK LIGHT              OFF
SPOT LIGHT              OFF

EX-COMP OFF

EXPOSURE MENU: IRIS PRI

MODE SHUTTER PRI

SPEED

1/50

GAIN LIMIT                30dB
AE SPEED                  01
BACK LIGHT              OFF
SPOT LIGHT              OFF

EX-COMP OFF

EXPOSURE MENU: SHUTTER PRI

MODE SHUTTER PRI

LEVEL 24
HIGH SENSITIVITY OFF

EXPOSURE MENU: BRIGHT

MODE GAIN PRI

GAIN

9dB

GAIN POINT               OFF
  POINT POSITION      30dB
AE SPEED                  01
HIGH SENSITIVITY     OFF
MAX SPEED

1/1750

MIN SPEED                1/50
BACK LIGHT              OFF
SPOT LIGHT              OFF

EX-COMP OFF

EXPOSURE MENU: GAIN PRI

«
...
36
37
38
39
40
...
»

Содержание BC-9 Series


























































Отзывы:

Нет отзывов