Bolin Technology BC-7 Series Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 56

background image

46

Upgrading MCU Firmware

MCU Firmware can be upgraded by following these steps:

1.

Load the .bin file onto a flash drive (Formatted as
FAT32), and name the file “HD20.bin”

2.

With the camera powered off, insert the flash drive to
the USB port on the back panel of the camera

3.

Apply power to the camera

The green indicator light above the lens will turn red for a few
seconds while the upgrade takes place. Once the upgrade is
finished, the light will turn green, and the camera will proceed
through a normal boot cycle. Check the data on the OSD boot
screen

Upgrading IP encoder firmware

You can upgrade camera IP encoder module Firmware via IP network.
Connect and configure your camera with your local network successfully, log in the camera IP web interface,
go to System, Maintenance section to upgrade the firmware.
How to make Firmware upgrade for IP Encoder, please refer to User Manual Part Two.

Upgrading FPGA firmware

You can upgrade camera FPGA Firmware via IP network.
Connect and configure your camera with your local network successfully, log in the camera IP web interface,
go to System, Maintenance section to upgrade the firmware.
How to make Firmware upgrade for FPGA, please refer to User Manual Part Two.

Video resolution upgrade

If you bought the camera that is FHD version, now you decide to upgrade it to 4K version. We can make it for
you, please contact your local dealer where you bought the camera from or Bolin technical support team for
help with containing the upgrade license.
The firmware for the FHD-To-4K upgrading is upgradable via IP network.

This firmware upgrade gives you following features added to the camera that you bought:

1. The camera you have bought is BC-7-4K20S-S3MNB with FHD resolution and 3G-SDI output.
2. By purchasing a license BC-7-4K20S-LS-4K, you can have following features added to the camera:

a.  Resolution will be upgrade to 4K, 2160p30.
b.  SDI video output will be upgraded to 6G-SDI.
c.  Other features may be upgraded.

Connect and configure your camera with your local network successfully, log in the camera IP web interface,
go to System, Maintenance section to upgrade the firmware.
How to make Firmware upgrade for FPGA, please refer to User Manual Part Two.

«
...
44
45
46
47
48
...
»

Содержание BC-7 Series

























































Отзывы:

Нет отзывов

Похожие инструкции для BC-7 Series

Бренд: Panasonic Страницы: 124

Бренд: Uniden Страницы: 32

RoboSHOT 12 HD-SDI

Бренд: VADDIO Страницы: 73

Бренд: Vaxcel Страницы: 5

STExB2X05-S Series

Бренд: E2S Страницы: 20

Бренд: KEEN Страницы: 49

Бренд: Axis Страницы: 8

Бренд: HiWatch Страницы: 14

smc Pentax-D FA Macro 100mm f/2.8

Бренд: Pentax Страницы: 12

Бренд: Pasco Scientific Страницы: 6

FlexPower VNC4030-111PAS

Бренд: Arlo Страницы: 2

Бренд: IMOU Страницы: 50

Бренд: SICK Страницы: 112

Бренд: Ingrasys Страницы: 8

Бренд: Alexor Страницы: 24

Бренд: Vip-Vision Страницы: 8

Бренд: Navitar Страницы: 4

Бренд: Walimex Pro Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды