25
5.2.2 Record Search
1. General
Go to “Main Menu” → “Record Search” → “General” to enter into the interface shown as
Picture 5-29.
Picture 5-29
Picture 5-30
Channel:
Select the channel you want to
search.
Type:
Select the type the playback record.
There are two options, i.e. Normal and Alarm.
Start Time/End Time:
Select the specific
period of time. The default setting is from 0:00
to 24:00.
Playback Channel:
Click a date and select
corresponding channel in Playback Channel.
The selected channels cannot be more than 16,
as shown in Picture 5-30.
Playback:
Select the desired year and month
and click “Search”. If there are any records, a
yellow corner mark which shows the recording
at specific date will appear at the lower-right
corner of the date sheet. Select the date
checkbox, select playback channel and click
Playback to enter into the interface.
Playback interface:
You can use the
Playback Control bar to operate the Fast
Forward (X2, X4, X8 and X16), Rewind (X2,
X4, X8 and X16), Slow play (1/2, 1/4 and 1/8
speed), Play, Pause/Frame. You can click or
drag the volume control bar to adjust volume.
When playback ends, DVR will remain in the
playback interface, as shown in Picture 5-25.
