Bolide MVR9004/8, Руководство пользователя

Страница: 38 / 45

Hard Disk Mobile DVR User Manual V2.2
38
6 Check: check bit is to select the check way. Generally it is chosen to be None.
7 Address: the address code is input directly by the address corresponding to PTZ setting, they must
be setting corresponding to, the default address code of most PTZ is 1. PTZ has adjustable address
code DIP, and it is needed to set different address codes to identify when there are numbers of PTZ.
8. Wiring method: PTZ cathode connected to RS485-A, negative connected to RS485-B.
When PTZ relevant parameters are set ready, the remote control can only be used to control PTZ after
the channel connected to PTZ is selected, for example, PTZ is connected to Channel 2, then you can
only control it by switching to 2-channel to maximize it on the monitor interface.
8.2 3G/4G settings
Description: When the MDVR wants to use
3G/4G network reporting platform, it needs
network-related settings in this menu.
1.According to the communication
configuration of the machine, insert the SIM
card, supporting. 3G/4G:
WCDMA/EVDO/TD-SCDMA,
FDD-LTE/TDD-LTE. SIM card slot is on the
front panel, open the lock to open the
protective cover, you can see the SIM
interface, follow the instructions to insert the
SIM card correctly.
2. Plug in the 3G/4G antenna after SIM card
inserting, ensuring that the system is able to receive good 3G/4G signal.
3 .Edit the image information under the 3G/4G Settings menu interface:
A: Wireless set to open.
B: Select the type of communication, press "ENTER" button to select the corresponding module
(WCDMA / EVDO / TD-SCDMA / FDD-LTE/TDD-LTE) is determined by the type of model, one model
only support one mode.)
C: The access point and the centre number is generally by default, which do not need to change. user
name and password in some provinces are not by default, some can be empty which do not need to
input anything, while most of them can just keep the default settings. If it is a foreign 3G/4G, it would
need the operators to provide access points and centre number to set, in some abroad places it is a
must to enter username and password for a normal dial-up. when your host can not be reported,
please make sure your 3G/4G settings are correct (most of the foreign districts are with WCDMA
equipment)
D: Save it after completing all the settings.
4 .After exiting all menus, press the INFO button on the remote control, it is able to see 3G/4G
communication, if signal is good, it will show dial-up is successful, the device can be reported to
CMSServer platform with three points of the server IP address settings, port settings and device
number settings.
8.3 WIFI Settings