Bolide MVR9004/8, Руководство пользователя

Страница: 29 / 45

Hard Disk Mobile DVR User Manual V2.2
29
3. Selectable packet time: 15/30/45/60 minutes, which stands for the time period how long the video
file will become a packaged file.
4. Automatically overwritten can be selected to on / off, when on, the previous video files will be
automatically overwritten if the hard disk space is less than 2G as well as the mirror video disk & SD
card space is less than 300M,.
5. Alarm pre-record time: when alarm occurs, the recording before the alarm occurs will be packed to
be included into alarm record (range 0-30min).
6.Alarm recording delay: when alarm stops, the recording after the alarm stops will be packed to be
included into alarm record (range 0-30min) to form an alarm recording file.
7. Alarm out sec: when alarm occurs, the continuous output time of an alarm after connected to an
external alarm device, the output time (5S - 255S).
8. Alarm file lock time is the storage time for alarm video to be saved on the hard disk, the mirror disk,
SD card. in protected storage time, the alarm recording will not be overwritten even if the SD card is
full. there are optional 1/3/5/7/10/15/30/45 days under the drop-down menu, please set the
appropriate number of days according to the hard disk capacity.
9. Video encrypt: Video files can be encrypted, using the player on a PC requires a password when
playback.
10. Audio output volume
：
You can set the output volume.
11. Live mode: You can set the number of channels the boot screen.
5.2 Main Code
1. Enable: On means open the recording
function of this channel, off means not
recording. When some channels do not
need record or video recording, you can
switch off the channel in order to save the
storage capacity of the storage device.
2. Resolution: optional D1/HD1/CIF.
3. Frame rate: PAL is with adjustable 1-25
frame, full frame rate is 25. NTSC is with
adjustable 1-30 frame, full frame rate is
30.
4. Quality: optional level 1-8, level 1 is with
the highest quality 1, while level 8 with
the lowest quality. the quality setting (good or bad) has a direct impact on the effect of record
playback. Under the same resolution, the higher the quality, the clearer the record. The record file
will obviously take up a relatively large space.
5. Audio: audio channel can be set on or off, if on, there is sound from the corresponding channel
during record playback, maximum two-channel audio can be opened.
Note: The main code plus mirroring video can support 6 full frame D1 record.