Bolide Technology SVR9004CHD, Руководство по эксплуатации

Страница: 50 / 65

5
、
DDNS Setting
: After user applies for DD
function under any one network type mode (Static, DHCP and PPPoE). Now
through domain name (
http://domain
setting.
6.3.3.4 Alarm Set
NOTE: SVR9004CHD/ SVR9004CHD
output. I/O Alarm is not applicable for these two models.
Click <Alarm> option to unfold its sub
1
、
Motion Detection:
allow you con
etc. Details setting should be consistent with DVR loca
45
: After user applies for DDNS service shown as Picture 6-23
function under any one network type mode (Static, DHCP and PPPoE). Now
http://domain name: port No ). Details setting should be consistent with DVR local
SVR9004CHDP and SVR9008CHD/ SVR9008CHDP are without sensor input and alarm
output. I/O Alarm is not applicable for these two models.
Click <Alarm> option to unfold its sub-options: Motion, I/O Alarm shown as Picture 6
allow you configure its <Sensitivity>, <Alarm out>, <Alarm record> and <Alarm Capture>
etc. Details setting should be consistent with DVR local setting (Shown as Picture 6
Picture 6-24
Picture 6-25
Picture 6-23
User Manual
3, you could enable <DDNS>
function under any one network type mode (Static, DHCP and PPPoE). Now you remotely visit the DVR
). Details setting should be consistent with DVR local
are without sensor input and alarm
ure 6-24.
figure its <Sensitivity>, <Alarm out>, <Alarm record> and <Alarm Capture>
l setting (Shown as Picture 6-25).