8
2.2.4.3
The driver being installed, a relevant window appears. Click Finish to complete
installation
2.2.4.4
Connect the interface converter to the PC with RS232 interface bus disconnected from
the interface converter (detach the terminal block). Wait for the message about successful completion
of driver installation and device being ready for operation. Upon installation of the interface converter
driver, the group Ports (COM&LPT) of the Device Manager shall contain the entry “CP2104 USB to
UART Bridge (COM x)” (where x is the number of the virtual COM port).
2.2.4.5
After the necessary connections are carries out, connect the interface converter to the
RS232 interface bus via the removable terminal block.
2.2.5
Testing Operability
Testing operability of the interface converter is conducted as described in Clause 3.4 of this
manual.
