bolid S2000-BI Rev.02 Скачать руководство пользователя страница 11

Страница: 11 / 14

Partition Status

LED Performance

Arming Failed

Pulses with amber: 0.5 s On / 0.5 s Off

Disarmed

Lit steady with green

Armed

Lit steady in red

Prohibited

Pulses with red within a second: 0.125 s On / 0.125 s Off

Function “Access Control”

Operating Status

LED Performance

Waiting for Response…

Flashes with red and green alternately

Can be Operated

Lit steady with green

Prohibited

Pulses with red within a second: 0.125 s On / 0.125 s Off

5.2

Sounding Modes

5.2.1

Table 18 presents performance of the sounder depending on conditions of the partitions.

Table 18.

Buzzer Performance

Partition Status

Buzzer Performance

Activated

Changes tone once per two seconds

Start Delay, Start Delay Hold

Within more than 15 s

Changes tone once per second

Start Delay, Start Delay Hold

Within less than 15 s

Changes tone twice per second

Start Delay, Start Delay Hold

Within less than 5 s

Changes tone four times per second

Fire 2 Alarm

0.8 s On / 0.2 s Off

Fire Alarm

0.6 s On / 0.4 s Off

Fire Prealarm

0.25 s twice / 1.25 s Off

Intrusion Alarm

0.25 s On / 0.25 s Off

Panic Alarm (Panic Alarm, Duress)

0.25 s On / 0.25 s Off

Trouble

0.25 s On / 1.75 s Off

Access Request (touching with an iButton)

Turns on for 0.25 s

Access Denied

Turns on for 1 s

Access Granted

Turns on for 0.25 s

Others

Off

Table 19.

Indication Mode Compatibility

Indication Type

Supported By

Intrusion Alarm

Intrusion 2 Alarm

Fire Alarm

Trouble

S2000 control panel of versions 1.20+
S2000M control panel of versions 2.03+
Orion KD software of versions 7.4+
Orion Pro software of versions 1.10 SP1+

Engineering

Auxiliary, Auxiliary 2, Auxiliary 3

Intrusion 3 Alarm

S2000M control panel of versions 2.03+
Orion Pro software of versions 1.11+

Operated Appliance

S2000M control panel of versions 2.07+
Orion Pro software of versions 1.12 SP2+

Leakage Monitoring

Door Monitoring

Access Control

S2000M control panel of versions 3.00+

5.2.2

The sounder can be silenced by pushing the button

. The UProg utility provides

restricting access to silencing alarms and troubles. In such case the button

is disabled, and

Содержание S2000-BI Rev.02















Результаты поиска

Содержание S2000-BI Rev.02

Отзывы:

Бренды по названию

Популярные бренды

bolid S2000-BI Rev.02, Инструкция по эксплуатации

Результаты поиска

Содержание S2000-BI Rev.02

Отзывы:

Бренды по названию

Популярные бренды