12
3.5
Technical Examination
Technical examination is not applicable for this equipment.
3.6
Preservation (Depreservation, Represervation)
Preservation is not applicable for this equipment.
4
Repair
Repair of faulty equipment is to be conducted by the manufacturer or in authorized repair
centers. The product shall be sent for repair in compliance with Company Standard QMS 8.5.3-2015,
which can be found online at our website
https://bolid.ru/support/remont/
.
A product’s failure resulted from consumer’s not observing rules of mounting and operation is
not a reason for claims and warranty repair.
Claims should be submitted to the following address:
NVP BOLID, #4 Pionerskaya Str., Korolyov, Moscow Region, 141070, Russia
Phone/fax: +7 (495) 775-71-55 (PBX) E-mail:
In case of any issue related to use of the product, please contact the technical support: +7
(495) 775-71-55 or e-mail:
5
Storage
Storage in a transport container is permitted at ambient temperatures -50
°
С
t50
°
С
and
relative humidity up to 95% at +35
°
С
.
Storage in the consumer package is permitted only in heated premises at temperatures +5
t40
°
С
and relative humidity up to 80% at +20
°
С
.
6
Transporting
The equipment can be transported in a transport container at ambient temperatures minus 50
t50
°
С
and relative humidity up to 95 % at +35
°
С
.
7
Disposal
The product can be disposed of considering that there are no toxic components in it.
The content of precious materials: doesn’t require accountability for storage, retirement, and
disposal (Clause 1.2 of GOST 2.608-78).
The content of non-ferrous metals: does not require accountability for retirement and further
disposal.
8
Manufacturer Warranty
The manufacturer guaranties the equipment meets with technical requirements stated in the
manuals if the user follows the instructions for transportation, storage, installation, and usage.
The warranty period is 18 months since putting the product into operation but no more than
24 months from the manufacturer’s date of production.
Attention!
The equipment shall be submitted for repair being assembled and clean and along
with all the parts listed in the documentation.
Claims are accepted only if a reclamation report describing the failure in question is
applied to the submitted equipment
