BOLEX H 16 Reflex-5, Руководство пользователя, Страница: 9 / 20

Spools of 200 ft., even of 100 ft. if the camera is used without a magazine, can be loaded in
daylight. providing sufficient care is taken to avoid direct sunlight when loading the film.
1. When the lids of the magazine and the camera have been taken off, remove the hubs
from the magazine spindles by pressing down the push-buttons a and b on the
spindles.
2. The footage-counter lever must be fitted with the guide roller with the chromium-plated
flanges; raise the lever as far as it will go and it will remain locked in this position. Place
the other guide roller in the clip c.
3. The spring-loaded lever 25 should remain in its disengaged position.
4. Place the spool of unexposed film on the spindle a making sure it is pressed fully home
and locked in position by the retaining device on the spindle.
The motor drives the spool in a clockwise direction.
5. Lower the footage-counter lever. The guide roller will now press against the film (see
illustration opposite).
6. Insert the end of the film into the magazine aperture. Pull 3 c, the film through into the
camera and cut the end with the film cutter.
Loading the magazine and the camera (200 ft spool)