BOLEX H 16 Reflex-5, Руководство пользователя

Страница: 8 / 20

1. Lift the clamp and remove the light-tight cover plate
from the camera.
2. Remove the cover plate from the magazine film entry
aperture and then position this aperture over the
camera as shown in the illustration opposite.
3. Slip the front lug of the magazine under the front
retaining bar of the support. The magazine will then
clip into place in the housing on the camera.
4. Lower the clamp.
N. B. The carrying handle can be positioned either to
the right or the left of the magazine to suit the
user.
5. Attach the MM take-up motor to the bayonet fitting as
shown in the illustration below. Press the motor into
the fitting and turn it in the direction of the arrow until it
locks fully home. The connector will then be pointing
downwards.
6. Insert the plug on the feed cable for the MM take-up
motor into the upper socket on the MST motor. To
disconnect, press down the small button on the socket
and pull the cable out.
Method of fixing the magazine onto the camera