OPERATION MANUAL
RotoMidi
12
2.3 Technical specifications
Equipment dimensions (mm)
height 880
mm, depth 480
mm,
width 900
mm
Flexible shaft used (mm)
12
Length of flexible shaft (m)
23
Compatible pipe sizes (mm)
DN100-DN300
Rotation speed (rpm)
max. 1,500
Voltage / power (V / kW)
230V / 1.5
kW
Frequency converter
Electronic
Weight
(
kg
,
without/with flexible
shaft)
56 kg / 78 kg
IP rating
IP
4
4
2.4 Applications
The equipment is intended for the following applications:
1. Sewer cleaning and maintenance by milling with suitable tools.
2. Drilling open and grinding of blank resurfaced branch points by suitable
tools.
3. Removal of deformed or collapsed liner by suitable tools.
4. Removal of internal pipe deformities (roots, residues, notches, etc.).
2.5 Power supply
When using tools mountable onto the flexible shaft, always comply with the
respective instructions of their manufacturers!
Make sure the power supply is correct. The electrical current must be suitable
for the equipment.
The equipment may only be connected to 230
V mains connected to a 16
A
residual current device. The equipment is protected in accordance with the EU
standards. The power supply must be grounded. In case of incompatible
voltages, the unit’s frequency converter may switch off. If this happens
repeatedly, use another power supply.
V3 / 9.5.2022
