OPERATION MANUAL
RotoMax
13
3
.6 Emergency stop button
The equipment is provided with an Emergency Stop button. Depressing the
Emergency Stop button interrupts the power supply to the motor. Prior to
replacing flexible shaft tools or servicing the equipment, always make sure the
Emergency Stop button is depressed or the power plug disconnected from the
electrical outlet.
ATTENTION! The Emergency Stop switch does not de-energize the equipment!
3
.7 Electronic torque switch
The equipment is equipped with an electronic torque limiter that cuts off
power supply to the motor if the flexible shaft is subjected to excessive torque
(for example, due to tool getting stuck). This will cause the unit to stop.
If this happens, proceed as follows:
• Remove your foot from the foot pedal.
• While holding the flexible shaft’s protection jacket, move the shaft
back and forth in the pipe to make sure that the tool at the end of the
shaft has not become stuck.
• Depress the foot pedal again.
• If the problem recurs, use a sewer camera to identify the possible
cause of the problem inside the sewer.
3
.8 Foot pedal
The equipment is provided with a foot pedal. The equipment can only be
started using the pedal. Depress the foot pedal to start the equipment and
release the pedal to stop it.
!
V
2, 20.1.2021
