User Manual
22 of 23
Factory MENU
Reset
Reset Factory Default
- All setting values are initialized.
(Except Operating Time/Calibration Data)
Reset Operating Time
- Operating Time reset.
Reset Calibration Data
- Calibration Data reset.
Download
-Used to upgrade the firmware using the USB memory.
-Do not turn off the monitor while the upgrade is conducting.
FW Download
-Insert the USB memory containing the file (
“Thetis733.bin”) into the
USB port.
-Select the "FW Download" menu to start the firmware upgrade
-Time required: about 10 seconds
FPGA Download
-Insert the USB memory containing the file (
“Thetis.pof”) into the USB port.
-Select the "FPGA Download" menu to start the FPGA upgrade
-Time required: About 3 to 4 minutes
OSD Download
-Insert the USB memory containing the file (
“Boland_OSD.dat / Boland_Font.dat”) into the USB port.
-Select the "FPGA Download" menu to start the OSD upgrade
-Time required: About 5 to 6 minutes
Version
- Version / Release day / Release time / Panel on Time
