English
- 5 -
Before first use
Thoroughly clean the parts that will come in contact with food before you use the appliance for
the first time (see chapter “Cleaning”)
How to use
This appliance is intended for making fruit juice, smoothies, mix fruit and vegetables without hard
pieces such as shells, seeds, stalks, etc..
1. Place the main housing on the level-surface.
2. Put the ingredients into the bottle or jar. Don’t put the ingredients more than “Max” level. Never
put the hot ingredient into the bottle or jar (below 60 ºC).
3. Screw the blade holder onto the bottle by clockwise direction until it is fixed properly.
4. Place the blade holder with fixed bottle / jar into the main housing.
5. Hold the bottle and turn it by clockwise direction until to the end (hear a ‘click’).
6. Put the plug in the wall socket.
7. Turn the rotary switch to setting “P” “1” or “2”. The appliance is start working.
Noted:
Do not let the appliance run for more than 1 minute at a time. If you have not finished
processing after 1 minute, switch off the appliance and let it cool down to room temperature (at
least 1 minute) before run again.
8. Once finished processing, turn the switch to setting “0”.
9. Unplug the power cord from the wall socket.
10. Turn the bottle by anti-clockwise direction and remove it in an upwards.
11. Place the bottle up side down (blade holder on top), screw the blade holder on the bottle by
anti-clockwise direction until it is removed.
12. Put the lid on the bottle by clockwise direction until to fix properly. Also make sure the juice
outlet cap is tightly locked until to hear ‘click’ in order to avoid juice leakage.
13. If you want to drink your juice directly, unlock a juice outlet cap and juice can be pour out
through lid juice outlet for drinking.
Rotary switch speed setting
This appliance has 0 1 2 P setting for selection.
1 – Low speed
2 – High speed
P – Pulse
0 – Appliance Off
Tips:
• The blender is intended for prepare the fruit and fitness drinks, milk shakes, cocktails, smoothie
etc… It is better to pre-cut the large piece of ingredient to small piece (approx. 1 x 1 x 1 cm) then
put into the bottle. Never allow pour boiled / hot water into the bottle for ingredients preparation.
Содержание 05170104
