where the fastener may contact hidden
wiring.
Fasteners contacting a "live" wire may
make exposed metal parts of the power tool
"live" and could give the operator an electric
shock.
ADDITIONAL SAFETY WARNINGS
-Do not use the appliance if the cable or plug is
damaged.
-Ensure that the voltage indicated on the charger
rating label matches the mains voltage before
plugging in the charger.
-Connect the appliance to a socket that can
supply a minimum of 10 amperes.
-Only use the appliance with the specific electric
base / connector, supplied with the appliance.
-Do not use the appliance with damp hands or
feet, or when barefooted.
-Do not touch the plug with wet hands.
-Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
-This appliance is for household use only, not
professional, industrial use.
-This appliance is not a toy. Children should be
supervised to ensure that they do not play with
the appliance.
DESCRIPTION
A Keyless chuck
B Torque adjustment ring
C Cooling vents
D Soft grip
E Power light
F Forward/reverse switch
G On/Off/Speed adjustment
switch
H Battery release button
I Battery
J Battery indicator level
K Charger
L Charger jack
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
CHARGING THE BATTERY
-Caution: A new battery is not fully charged and
must therefore be charged before the appliance
is used for the first time.
-Charge the battery at an atmospheric tempera-
ture of between 4 and 40ºC.
-Plug the charger (K) into the mains.
-Connect the charger to the jack (L) using the
socket on the appliance. The socket is located
at the lower/back part of the appliance.
-The pilot light will come on to indicate that the
charger is charging the battery.
-When the battery is charged disconnect the
charger from the mains supply.
-NB: Do not use the appliance while it is con-
nected to the charger.
HOW TO CHECK THE BATTERY’S CHARGE
LEVEL:
-Press the battery charge level indicator button,
the pilot lights that indicate if it is charged will
light up.
-If all three pilot lights come on (red, yellow
and green) this means that the appliance is
fully charged.
-If only two of the pilot lights light up (red and
yellow) this means that the battery is half
charged.
-If only one pilot light lights up (red) this
means that the battery has very little power
remaining.
-If no pilot light lights up, this means that the
battery is completely flat.
-NB: For a long battery life, it is advisable to
charge the battery, only, when it has run out
completely.
ASSEMBLING THE BATTERY/S
-Caution: During the handling of batteries, do
not touch both poles at the same time, as this
will provoke the partial discharge of the stocked
energy therefore affecting longevity.
-Check that the plastic covering that protects the
battery has been removed (some batteries are
sold with a protective covering).
-It is essential that the batteries should always
be the same kind and the same charge. Never
mix alkaline batteries with normal one (Car-
bon-Zinc) and/or rechargeable ones.
-N.B. When changing the batteries, the config-
uration of the appliance will be removed, and
you will need to reset the parameters of the
appliance.
Содержание ES9899920H
