1
Introduction
Quick Start
Your
Bogen Pro BP15DSP/BP12DSP Powered Loudspeaker
is capable of high
sound pressure levels and has been designed to give you performance that is better
than any loudspeaker in this range, thanks to the quality of its transducers and built-in
amplifier. Enjoy your new Bogen Pro Powered Loudspeaker. Please be sure to read
and follow instructions within this manual carefully before you begin operation.
Make all initial connections with all equipment powered off, and ensure that all the
main volume controls are turned down completely.
1. Connect one end of the signal cable at your audio mixerʼs main output.
Then connect the other end of the signal cable into the LINE input of your
powered speaker cabinet. Repeat for second speaker.
2. Connect the power cord(s) to AC Mains.
3. Turn on your mixer first, then the powered speaker cabinet(s).
4. Set switch to “LINE” position and turn up the volume control of the powered
speaker cabinet(s).
5. Use mixerʼs level controls to manipulate the output level accordingly.
6. After using, turn off your powered speaker cabinets first, then the mixer.
Power Cord
Tripod
Mount
Left
Main Mix
Output
Signal Cable
Mixer
Power Cord
Tripod
Mount
Right
Output
Main Mix
Signal Cable
54-2218-01B_BP-Series Manual_Layout 1 8/19/13 2:35 PM Page 3
