background image

2. A minimum of three paging zones and maximum zone capac-

ity of ninety-nine (99) paging zones. The system shall be
expandable in groups of three zones.

3. Up to 32 field-programmable paging zone groups, each con-

sisting of 

1

to 99 zones.

4. Field programmable Night Ringer Zone Group, consisting of

from 

1

to 99 zones. This feature shall be activated by high-

voltage ring signal or contact closure.

5. Field programmable Emergency/Shift change Zone Group,

consisting of from 

1

to 99 zones. This feature shall require

activation by a customer-supplied contact closure, and sound
a user-selected tone. The user shall have the choice of no
tone (allowing use of outside tone source), tone burst (

1

-7

sec. duration, user-selected), single chime, or quad beep.

6. Emergency All-Facility Page Override. This feature shall be

activated through a loop start trunk or through contact clo-
sure and dry audio input. It shall override the normal paging
features of the system, sound a user-defeatable alert tone in
all zones, and open an audio channel for a voice page.

7. Built-in, talkback amplification of central-amplified zones.

This feature shall require the addition of the PCMTBM mod-
ule.

8. Background music assigned per zone and local background

music sourcing capability.

9. Field programmable Code Call Zone Group, consisting of

from 

1

to 99 zones.The user shall have the choice of pattern

or echo code calls, and repeat functions.

1

0. Eight daily time-triggered signaling events. This feature

requires the use of the PCMTBM module.

11

. Two (2) C-form relay contact sets for activating external

equipment. The contacts shall change state when the unit is
activated.

1

2. Capability of providing uninterrupted background music to

all zones not being paged.

1

3. Non-volatile RAM shall be included to allow for retention of

programming information during power interruptions

1

4. Screwdriver-adjustable volume control of confirmation, pre-

announce, error, and shift change/emergency-call tones.

50 Spring Street, Ramsey, NJ 07446

20

1

-934-8500 FAX: 20

1

-934-9832 www.bogen.com

Architect & Engineer Specifications, cont.

Содержание PCM2000

Страница 1: ...paging and time triggered signaling events with PCMTBM module Field programmable using DTMF and DIP switches Signaling features include night ringer zone group emergency shift change zone group code call zone group Emergency All Facility Override Paging Background music assigned per zone Local Background music sourcing capability Relay drivers and Aux contacts included Allows total system amplifie...

Страница 2: ...nnects to the telephone system via a standard RJ11 plug and is programmed simply by using common DIP switches All other connections are made to built in terminal blocks using only a small screwdriver Setup is also easy Zone group programming selection of all sig naling functions and all other parameters are set by simply dial ing in with a touch tone telephone The telephone interface module is equ...

Страница 3: ...e sys tem The module shall provide for satellite system identification via built in DIP switches It shall include a locking program run selector switch with program LED satellite data link RCA jack and 12V DC power source jack A connector block using screw terminal connections shall be provided for paging ampli fication connection low power and high power BGM connec tions emergency shift change si...

Страница 4: ... the system sound a user defeatable alert tone in all zones and open an audio channel for a voice page 7 Built in talkback amplification of central amplified zones This feature shall require the addition of the PCMTBM mod ule 8 Background music assigned per zone and local background music sourcing capability 9 Field programmable Code Call Zone Group consisting of from 1 to 99 zones The user shall ...

Отзывы: