5
The following buttons are available at the top of all pages in the application.
Temperature
Provides a snapshot of the amplifier module’s temperature
in degrees Celsius during any transition (that is, change
state) on the Channel 1, Channel 2, or Protection Status
indicators.
Note:
The ASB’s UI displays the temperature reading from
the latest update; it does not receive or display continuous
real-time amplifier module temperature readings.
Volume
Sets the volume for the speaker during an intercom call or
page. This is a temporary adjustment that allows the user
to experiment with the loudness of the speaker. To make
permanent adjustments, change the various cut level set
-
tings on the Nyquist System Controller.
The value can be adjusted between -42 dB and 0 dB.
Table 3. Appliance Dashboard Buttons
Dashboard
Displays the dashboard.
Configuration Settings
Accesses the Configuration Settings page where you can
view and set various options or select to receive config
-
uration settings from a Nyquist server.
Network Settings
Accesses the Network Settings page where you can view
and set network settings, such as the static IP address.
Firmware Update
Accesses the Firmware Update page where you can view
the current Nyquist version, update firmware to a new
version, restore the configuration to factory settings,
and reboot the appliance.
Logs
Accesses log files, which record either events or mes
-
sages that occur when software runs and are used when
troubleshooting the appliance.
Help
Accesses the appliance’s online help.
Manual
Displays the appliance’s configuration manual.
Logout
Logs out of the appliance’s dashboard.
Table 2. ASB Status Indicators (Continued)
