34
To adjust the noise gate settings for a channel:
1
On the appliance Web UI’s main page, select
DSP
.
2
Select the
Menu
button for the channel.
3
From the drop-down menu, select
Noise Gate
.
4
Adjust the following settings as needed:
Figure 15. Noise Gate Settings
Note:
If you want to return to the factory settings, select the
Reset
icon that appears in
the right corner.
Table 15. Noise Gate Settings
Enable
Enables or disables the noise gate DSP effect for this chan
-
nel.
Threshold
Sets the minimum threshold level that the signal must
reach for the noise gate to “open,” allowing the signal to
be sent to the output channel.
Threshold range is -135 to +21 dB.
