Follow the instructions below and refer to Figure
1
to assemble the lectern.
1
. Attach the column(s) to the base plate using 4 round head mounting bolts. The casters go toward the rear of the
assembly.
2. Attach the connecting plate to the top of the speaker columns with 4 flat head bolts. Make sure the electrical connectors
pass through the connecting plates and are not crimped or pinched.
3. Connect the electrical connectors from the column into the jacks on the underside of the tabletop portion.
4. Set the table top section onto the connecting plate and secure with 4 round head bolts.
5. If using the MLA40 tabletop section alone or the MLA40T, attach the 4 plastic feet to the underside of the tabletop using
the 4 round head bolts.
ELECTRICAL
CONNECTORS
TABLE TOP UNIT
PLASTIC FOOT
(SEE STEP 5)
4 MOUNTING BOLTS
1/4 x 20 FLAT HEAD
4 MOUNTING BOLTS
1/4 x 20 ROUND HEAD
SPEAKER COLUMN
4 MOUNTING BOLTS
1/4 x 20 ROUND HEAD
CONNECTING
PLATE
BASE (CASTERS IN BACK)
Figure 1
Page 4 of 8
