Bogen LMR1S, Руководство пользователя, Страница: 2 / 8

4. Gain
Provides control over the level of input signal that can be applied to the internal signal buses
of the main unit. Balances the input levels of various devices so that the main unit controls can
be set to relatively uniform or optimum levels.
1
8-60 dB Gain range in MIC position, -2 to 40
dB in Line position.
1 6
1
. Gate - Threshold (Thresh)
Controls the amount of input signal level neces-
sary to turn the module’s signal output on and
mute lower priority modules. Clockwise rotation
increases the necessary input signal level required
to produce audio output and mute lower priori-
ty modules.
3. Limiter (Limit)
Sets the signal level threshold at which the mod-
ule will begin to limit the level of its output signal. An LED to the left of the knob illuminates
when the limiter is active. Clockwise rotation of the knob will allow more output before lim-
iting, counterclockwise rotation will allow less. The limiter monitors the module’s output sig-
nal, so increasing Gain will affect when limiting takes place.
7. MIC/Line In
MIC/Line level input on screw terminal strip. Electronically balanced input.
5. Treble (Treb)
The Treble control pr/-
1
0 dB at
1
0 kHz. Clockwise rotation provides boost; coun-
terclockwise rotation provides cut. Center position provides no effect.
2. Gate - Duration (Dur)
Controls the amount of time the signal output
and priority muting of the module remains
applied to the main unit’s buses after the input
signal falls below the required minimum signal
level (set by the threshold control).
6. Bass
The Bass control pr/-
1
0 dB at
1
00 Hz. Clockwise rotation provides boost; counter-
clockwise rotation provides cut. Center position provides no effect.
8. Remote Control
Input level can be controlled by direct voltage input or by remote
1
0K-ohm pot.
LMR1S LMR1S
REMOTE REMOTE
CONTROL CONTROL
MIC/LINE MIC/LINE
IN IN
1
2
3
1
3
4
7
2
5
6
8
Block Diagram
CS+
W GND
INPUT A
T
TEN.
+
_
GND
MIC/LINE
INPUT
MIC/LINE