Bofa V250, Руководство пользователя

Страница: 11 / 14

Maintenance
Filter Replacement
The V250 will alert the user when its filters needs to be
replaced. When the filter becomes full the red ‘Filter
Indicator ‘ light next on the left side of the label will glow.
To remove and replace the combined filter follow the
procedure detailed below.
1. Isolate the electrical supply to the extractor
2. Undo the clips on the sides of the unit and remove
the lid.
3. Lift the filter out of the unit. Once removed it is
recommend that the used filters are bagged and
sealed.
4. Lower the new filter into position.
Replace the lid, and fasten the clips.
To remove and replace the pre filter follow the procedure
detailed below.
1. Isolate the electrical supply to the extractor
2. Undo the clips on the sides of the unit and remove
the lid.
3. Lift the pre filter out of the combined filter. Once
removed it is recommend that the used filter is
bagged and sealed.
4. Lower the new filter into the top of the combined
filter.
5. Replace the lid, and fasten the clips.
Note: The filter MUST be fitted when the extractor is in
use.
02