8
Version 10.08.2011
Extractor Installation Procedure
Caution
If this equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
Read all instructions in this manual before using this extractor.
1. Move the unit to the location where it is going to be installed and remove the unit
from its packaging. The unit should be installed in a well ventilated room.
Caution
Due to the weight involved the extractor unit should only be lifted using suitable lifting
equipment and with regard to appropriate safety precautions. (See Appendix for
product weight details).
2. Ensure that a 0.5m space is available around any louvered areas of the unit to
ensure adequate air flow. Lock the two castors (if fitted).
Caution
Do not block or cover any louvers or cooling holes on the unit as this severely
restricts air flow and may cause damage to the unit.
Caution
Under no circumstances should the exhaust outlet/s be covered as this will restrict
the airflow and cause overheating.
3. Check filters are located in their correct position and carefully replace lid/close
door.
4. Connect the extraction ducting between the extractor inlet and the fume capture
device as detailed previously.
