Boeco TC-PRO-3048, Инструкция по эксплуатации

Страница: 28 / 81

BOECO TC-PRO
Thermal Cycler Chapter Four Operation Guide
— 20 —
Hotlid=off 2007-11-1 10:05:00
Date: 03-10-22
Time: 14:53:19
Default User : PCR1
Default File: BOECO
Control Mode: Block
Hotlid: off
Key Sound: Yes
Run End Sound: Yes
Back Save
Hotlid=off 2007-11-1 10:05:00
100
75
50
25
0
Temp
1c 95.0 2c 55.0 3c 72.0 4 04.0
Time
1:00 02:00 01:45 00:00
File Name:PCR1
User: BOECO Now Running
•••
1c Temp=00.0 Time=00:00 Cycle1 01 of 10
Total Time: 00h 56m Remainig Time:00h 56m
Stop Pause Start Skip View File .
During normal running of a file, it will be
flashing at the position of “Now Running
•••
”.
When the file is running over, the system will
alarm “File run over”.
 Press “ Stop ” and it will remind “Confirm
stop running?”.
 Please select “ Stop ” or “ Start ”
according to the reminding information.

Press “ Pause ” and it will remind “Now
pause running?” According to the
reminding information the user can
select “
Start ” to continue. If the user
doesn’t make a decision within 100
seconds, the system will continue running automatically.
 Press “ View File ” to view edited PCR programs.
 Press “ Skip ” to stop current temperature segment and run the next.
2.2 How to set system parameters
In the main interface press “
System ” to
enter into system parameter setting
interface.
Press “Enter” to move the cursor to the
next item. The option is followed by the
symbol “ ”. Press
“Up/Down” to roll the
option for selecting, and other information
can be input by pressing
“Digit&Letter” .
Press “Right/Left” to move cursor’s
position.
 Press “ Back ” to go back to the main
menu.
 Press “ Save ” to save parameters.
Special Reminding: When set the parameter, please press the “Save”, otherwise the
parameter remains the original one.
2.2.1 “Date”
，
“Time” state the default system time after power-on.
2.2.2 “Default File”, “Default User” state the default running program and the default user name.
File Running Interface
System Parameter Setting Interface