2-2-1 Installing the Mechanical Stage Support Device
Before installing the device, be sure to adjust the coarse focus knob. Make the guide board (see
figure 1)down to the lowest position, so you can install the mechanical stage support device easily.
Hold on the mechanical stage support device (figure 2), place it from the top of the guide board
(figure 1), let the device (figure2) falling free until it reach the limit position. Use the hexagon wrench
screw down the locking block, make the stage support device (figure1) and the guide board fixed
together.
The mechanical stage have been adjusted horizontally and fixed together before leaving
factory. Do not disassembly unless necessary, that may affect the observation precision of
the instrument.
