minutes of the first and the last levels will be executed averagely by the rest
26 levels.
5.
9 HOLES mode have not functions of WARM UP
or
COOL DOWN
. When
distance is up to
3.5KM
, the motor will stop and displays
” End”
.
IV.
Program Operation and Instruction：
Goal Mode
1.
Press
Start, and
it will
begin to count down for 3 seconds, after that, the
motor will start , and the speed will start at 0.8KPH
（
0.5MPH
）
. The matrix
window goes contrarotate like along playground, at the speed of 0.4KM
(0.25MIL).
2.
The speed STEP is 0.1 and press increase/decrease speed keys to
select (the step is 0.1） or press instant keys1、2、4、6、8、
10 to select.
3.
The incline STEP is 1 and press increase/decrease incline keys to
select（the step is 1） or press instant keys 2、4、6、8、10、
12 to select.
4.
TIME can be either set or not set:
(1) When TIME has been set, the window will display a time value counting
down from the target value. When the time reaches 0:00, the treadmill will
stop automatically.
(2) When TIME hasn’t been set, the window will display the exercise time.
When the time reaches 99:00, the treadmill will stop automatically.
5.
Press Stop when the motor is working, then the motor and the incline motor
will stop and the matrix window will display Stop; If you press
Start
again,
the motor will start after 3-seconds countdown, the speed will be kept at the
same speed before stop, and the incline will be increased to the set height
before stop.
6.
Under start/ready or pause mode, press Stop / Reset and hold it
for 3 seconds, then it will come back to start/ready status.
7.
It will go back to the Start/Ready position after 5 minutes in the pause
position.
8.
It will go back to the Start/Ready position after 30 seconds in the Run End
position (or press
Stop / Reset
key).
9.
The time pre-set value is 0, range 20~99. When the time is edited at 20
minutes , you can press
to increase or decrease, the increase step is 1.
If decrease , it will go back to 0 directly. During exercise, the matrix window
goes contrarotate like along playground. The middle of LCD matrix
window will display the circle values during performance.
