Bodyworx JX150HR, Руководство пользователя

Страница: 10 / 20

- 9 -
7. MAINTENANCE
1. If the belt tends to move off the center, stop the treadmill.
Take the Hex Wrench and adjust the Hex Screw in the Rear
End Cap. For example, if the running belt is moving towards
the left side, tighten the left Hex Screw about 1/4
turn(clockwise); if the running belt is moving towards the
right side, tighten the right Hex Screw about 1/4
turn(clockwise); Turn on the treadmill after it has been
adjusted. If you find that the belt has not moved to the proper
position, please repeat the steps above. Don’t use the treadmill
until the running belt returns to the center position.
(PS.1. This action is very important, if the belt is not in the
center, be sure to follow above steps.)
(PS.2. The position of running belt might not stay precisely in
the center with slightly towards the left and right sides,
and the situation varies with how end-users use and the
weight of end-users. No need to adjust the belt if it doesn’t
rub against the parts aside.)
2. Depending on the usage of the product, please apply
SILICON on the board according to the below chart. Use
the Hex Wrench to unscrew the bolt inside the Rear Roller.
Then pull the belt up and daub some SILICON to the center
of the board. After that, adjust the belt to the center of the
deck, followed by tightening the screw to the original set.
(PS.W hen the belt is sliding, please follow the above method
to lubricate the running belt. )
KGS/LBS Speed Interval
6KM/hr Below
6~12KM/hr
KGS
12KM/hr Above
4mile/hr Below
4~8mile/hr LBS
8mile/hr Above
1 year
6 months
3 months
6 months
1 year
3 months
Note: This maintenance is intended for
household use.
If used for business, it is suggested to
examine the product every other month