GETTING STARTED
TURN POWER ON
The On/Off switch for the treadmill is located next to the power supply cord at the back of
the motor cover. Flip this switch to the “ON” position.
SAFETY TETHER KEY AND CLIP
The safety key is designed to cut the main power to the treadmill should your fall. Therefore,
the safety key is designed to bring the treadmill to an immediate stop. At high speeds, it
may be uncomfortable and somewhat dangerous to come to a complete stop immediately.
So, use the safety key as emergency top only. To bring the treadmill to a complete stop
safely and comfortably, use the red stop button.
Your treadmill will not start unless the safety key is properly inserted into the key holder in
the middle of the console. The other end of the safety key should be securely clipped to
your clothing so that in the case that you fall, you will pull the safety key from the console,
which will stop the treadmill immediately to minimize injury. For your safety, never use the
treadmill without securing the safety key clipped to your clothing. Pull on the safety key clip
to make turn it will not come off your clothing.
GETTING ON AND OFF THE TREADMILL
Handle with care when getting on or off the treadmill. Try to use the handlebars while
getting on or off. While you are preparing to use the treadmill, do not stand on the running
belt. Straddle the running belt by placing your feet on both side rails of the treadmill deck.
Place your foot on the belt only after the belt has begun to move at a consistent slow speed.
During exercise, keep your body and head facing forward at all times. Never attempt to turn
around on the treadmill when the running belt is still moving. When you have finished
exercising, stop the treadmill by pressing the red stop button. Wait until the treadmill comes
to a complete stop before attempting to get off the treadmill.
WARNING!
Never use this treadmill without first securing the safety tether clip to our clothing.
CAUTION!
For your safety, step onto the belt when the speed is no more than 3km/h.