SPEED PAIR STAGE
SPEED TRANSMITTER ILLUSTRATION
Note: All models will be paired right after production.
For commercial and maintenance purpose – press and hold both ‘MODE’ and ‘PAGE’ key
for 3 seconds to go into setting. Wake up speed sensor by stepping on the bike, the speed
transmitter will send signals to the console for pair stage.
If the number ‘0’ is displayed on LCD, it means that pair stage is successfully completed.
If the monitor displays ‘Err’, it means the pair stage has failed. The user can press ‘PAGE’
key, and repeat the pair stage again. Console will exit pairing stage automatically after
10 seconds with previously paired speed transmitter.
Notice: LED indication light will flash a few times when it wakes up and ready to be paired.
AAA battery x2
LED indication light
Sensor plug-in port
M20X · CONSOLE INSTRUCTION MANUAL
ENG
