MAGNET
The placement of the magnet and the sensor will depend on the model of the bike.
In the case of a bike with a magnet incorporated in the flywheel (models MT2 and MT3),
the sensor must only be placed at a maximum distance of 8 mm from that magnet,
no need extra magnet (FIG.1).
In the case of a bike that does not have a magnet in the flywheel, it is necessary to add the
round magnet glued with double-sided tape on the flywheel (models EX3 and EX4) (FIG.2).
In the case of the EX2 model, the magnet is firmly attach on the crank arm (FIG.3) at the
measured location. The allowable maximum distance between the magnet and sensor
is 8 mm.
Fig 1
MT2 · MT3
Fig 2
EX3 · EX4
Fig 3
EX2
M20X · CONSOLE INSTRUCTION MANUAL
ENG
