BODYMAX CVEB2706, Руководство по сборке и эксплуатации

Страница: 10 / 32

10
FXB20 FOLDING EXERCISE BIKE
1
2
12
1
2
12
4.2 Assembly Step
Before assembly, take a close look at the individual assembly steps shown and carry out the
assembly in the order given.
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Unfold
1. Remove the lock pin {12) from the rear frame (2).
2. Place the unit by pulling the rear (2) and main (1) frames apart.
3. Adjust the upper pin holes on both frame parts so that they are in line. Snap the frame parts
together by sliding the lock pin (12) through both holes.
NOTICE
There are two angle settings on the main frame for training:
+ Middle Position: Compact training position more likely to an upright bike
+ Lower Position: Relaxed training position
4 ASSEMBLY