background image

 

26

P

RODUCT 

W

ARRANTY 

VALID FOR USA AND CANADA ONLY 

(Please consult with your local distributor for warranty info specific to your region). 

 
BODYCRAFT warrants its products to be free of defects in materials and workmanship for the time stated 
below to the original purchaser. 
 
REGISTER your product at www.bodycraft.com or call our customer service department at 800-990-5556. 

 

 

 

 

This warranty is valid only in accordance with the following conditions: 

The warranty begins on the original purchase date at retail and ends when the original owner disposes of it, 
either through sale, gift, or otherwise. This warranty is not transferable and is only valid to the original 
purchaser. 
This warranty is available only for purchases made within and the original purchaser currently residing in the 
USA and Canada. Please consult with your local distributor for warranty info specific to your region. 
The product must have been registered within 30 days of the original purchase date or supply proof of purchase 
to validate warranty (original sales invoice). 
This warranty does not cover damage resulting from accident, misuse, water, tampering, unreasonable use, 
unauthorized repairs, improper repairs, alterations or normal wear and tear. 

 

This warranty excludes the following: 

1.  The warranty does not cover normal maintenance or labor charges unless labor terms are listed above.   
2.  Normal cosmetic wear on parts such as paint, seat coverings, walk belts, pedal straps, wheels, foot rails, 

labels and logos. 

3.  Consumables such as batteries and heart rate belts that do not have a replaceable battery. 
4.  Eprom/Software version upgrades unless determined as necessary. 
5.  Any accessories not included in the original packaging. 

 
If the item exhibits such a defect, BODYCRAFT will, at its option, repair or replace it without cost for parts. 
Shipping and handling charges may apply. (BODYCRAFT may require return of the part(s) or photographic 
evidence of the damaged part(s) prior to replacement). Serial number may be required. Parts repaired or 
replaced will be warranted for the remainder of the original warranty period only. 

 

* This warranty is in lieu of all warranties, expressed or implied, and/or all other obligations or liabilities on our part and we 

neither assume nor authorize any person to assume for us any other obligation or liability in connection with the sale of 

your BODYCRAFT product. Under no circumstances shall we be liable by virtue of this warranty or otherwise for damage 

to any person or property whatsoever for any special, indirect, incidental, secondary or consequential damage of any 

nature whatsoever arising out of the use or inability to use the BODYCRAFT product. 

This warranty applies to Residential and Light Commercial use only. 

Residential Warranty: 

Lifetime Frame, [10] Year(s) Parts, [1] Year(s) Wear Items and [2] Year(s) Labor. 

Light Commercial Warranty: 

[10] Year(s) Frame, [3] Years Parts, [90] Days Wear Items and [90] Days Labor.

Содержание R1000G




























Отзывы: