background image

1

BEFORE YOU BEGIN

Congratulations  and  thank  you  for  selecting  the  

MINI-               

strength  training  

system.    The  

MINI-               

offers  an  impressive  array  of  strength  training  

exercises  to  develop  every  major  muscle  group  of  the  body.  Whether  your  goal  
is  cardiovascular  fitness,  a  shapely,  toned  body  or  dramatic  muscle  size  and  
strength,  the  

MINI-               

will  help  you  achieve  the  specific  results  you  want.

For  your  safety  and  benefit,  read  this  manual  and  the  accompanying  literature  
before  using  the  

MINI-             

.    Keep this manual for  future reference.

If  you  have additional  questions, please  call  your local  dealer  or  our   customer   
service   department   at   800-990-5556  Monday  through Friday, 9 a.m. until 5 p.m. 
Eastern Time.

IMPORTANT SAFETY NOTES

There  is  a  risk  assumed  by  individuals  who  use  this  type  of  equipment.  

Before  beginning  this  or  any  other  exercise  program  consult  your  physician.   

This  is  especially  important  for  individuals  over  the  age  of  35  or  persons  

with  pre-existing  health  problems.  Recreation  Supply,  Inc.  assumes  no  

responsibility  for  personal  injury or  property  damage  sustained  by  or  

through  use  of   this   product.

1. This  product  must  be  assembled  on  a  flat,  level  surface  to  assure  its 
     proper  function.
2. Clean  pads  and   frame  on  a  regular  basis.   We  recommend  warm, 
     soapy  water.  Do  not  use  harsh  or  abrasive  chemicals.
3. Inspect  and  tighten  all  parts  before  every  use.   Replace  any  worn 
     parts  immediately.   Failure  to  do  so  may  result  in  serious  injury.
4. Keep  children  away  from  the  

MINI-                

at  all  times.

5. Keep  your  hands  away  from  cables  and  pulleys  during  operation.  
     Keep  your  hands  away  from  moving  parts  other  than  the  designated 
     handles.
6. When  adjusting  the  seat,  make  sure  the  spring  pin  is  fully  engaged. 
     If  not,  the  seat  may  slip  and  cause  serious  injury.
7. Make  certain all cables  are  seated  within  the  pulleys  before  every  use.
8. Exercise  with  care  to  avoid  injury.
9. If  unsure  about  the  proper  use  of  the  

MINI-                

strength

     training  system  call  your  local  dealer  or  our  customer  
     service  department  at  800-990-5556. 

Press

X

Press

X

Press

X

Press

X

Press

X

Press

X

Содержание MINI-XPress 7351












Отзывы: