216
216
201
206
206
237
236
237
236
239
224
235
236
208
210
239
224
235
204
210
215
214
225
236
239
235
224
225
226
236
239
209
210
203
210
235
224
227
227 236 205
236
223
235
222
STEP 4 ASSEMBLE BASE FRAME
7
1. Attach the Base Frame (201) to the Connecting Rear Stabilizer (202) using two 1/2" X 5"
Hex Bolts (223) and two 1/2" Washers (235).
2. Insert the 1" Axle (shorter) (209) into the Leg Press Support (203) at the underside of the
bend, and a Ring Spacer (210) on each end of 1" Axle (shorter) (209). Then attach Leg
Press Support (203) to the end of Base Frame (201) using two 1/2" X 1" Hex Threaded
Bolts (224), and two 1/2" Washers (235). Tighten these bolts and cap with two Dome End
Caps (239).
3. Insert the 1" Axle (longer) (208) into the top hole of the Leg Press Support (203), and attach
a Ring Spacer (210) on each end of 1” Axle (longer) (208). Then attach the Foot Plate (204)
using two 1/2" X 1" Hex Threaded Bolts (224), and two 1/2" Washers (235). Tighten these
bolts and cap with two Dome End Caps (239).
4. Attach two Seat Handles (206) to the Base Frame (201), using two 3/8" X 3-1/4" Hex Bolts
(225), four 3/8" Washers (236), and two 3/8" Nylon Nuts (237). Tighten these bolts.
5. Attach Seat Pad (215) into the Base Frame (201), using two 3/8" X 2-3/4" Hex Threaded
Bolts (226) and two 3/8" Washers (236).
6. Attach Back Pad (214) into the Back Pad Adjuster (205), using two 3/8" X 1" Hex Threaded
Bolts (227) and two 3/8" Washers (236). Then slide the Back Pad Adjuster (205) to the
Base Frame (201) and lock at your desired position using the Locking Spring Knob (222).
7. Stick two Non Slips (216) on Foot Plate (204).
