19
25
43
21
49
20
20
21
20
20
42
51
42
16
51
51
49
51
51
49
21
49
41 41
51
49
16
49
51
30
49
51
19
23
21
3
4
5
6
2
7
1
41
51
4
Do NOT tighten bolts until instructed.
1. Attach Leg Extension Sleeve (2) to Front Stabilizer (1) using two 1/2" X 4" Hex Bolts (41), four 1/2"
Washers(51) and, two 1/2" Nylon Nuts (49). Attach two 45mm X 75 mm Caps(19) to Front Stabilizer
(1).
2. Attach Upright Connector (4) to Right and Left Uprights (5, 6) (numbers sticker should face inside),
using Backing Plate (16), two 1/2" X 3" Hex Bolts (42), four 1/2" Washers (51) and two 1/2" Nylon
Nuts (49). Attach four 75mm X 45mm Caps (20) to Right and Left Upright bottoms, and two 45mm X
75 mm Plugs (21) to top of Uprights.
3. Slide Seat Slider(7) onto Seat Support(3) with welded metal tabs facing toward rear of bench as shown.
Attach Seat Support (3) to Upright Connector (4) using two 1/2" X 4" Hex Bolts (41) and two 1/2"
Nylon Nuts (49).
4. Attach Seat Support (3) to Leg Extension Sleeve (2), using two 1/2" X 2-1/2" Hex Bolts (43) and two
1/2" Washers (51). Attach a 45mm x 75 mm Plug (21) to Seat Support (3).
STEP 1 Assembly Instructions
