manualshive.com logo in svg

BodyCraft Cable Pull Station, Руководство по сборке и эксплуатации

Поделиться
Скачать
BodyCraft Cable Pull Station Скачать руководство пользователя страница 12

Cable Pull Station

12

Recommended Tools for Assembly

Ratchet, 9/16“ Socket, 3/4“ Socket, 9/16“ Combination Wrench, 3/4“ Combination Wrench

Adjustable Wrench, Rubber Mallet, Metric Allen Key Set

STEP 1 Assemble Main Frame

TO EASE THE ASSEMBLY PROCESS

DO NOT TIGHTEN BOLTS UNTIL INSTRUCTED.

1. Install two oval end caps (26) 

onto both ends of each of the 

base frames (2) as shown.

2. Install two round caps (28) on 

the top and bottom ends of the 

rear upright (6) as shown.

3. Attach the two base frames (2) 

to the main frame (1) using four 

1/2“ X 3-3/4“ hex bolts (39) and 

four 1/2“ washers (54) as shown. 

Do NOT tighten.

4. Attach the front upright (5) 

with the numbers facing forward 

to the main frame (1) using two 

3/8“ X 1“ hex threaded bolts (44) 

and two 3/8“ spring washers (55). 

TIGHTEN the two 3/8“ X 1“ hex

threaded bolts (44).

5. Attach the rear upright (6) to 

the main frame (1) using two 3/8“ 

X 2-5/8“ hex bolts (42), three 3/8“ 

curved washers (57) and one 3/8“

nylon nut (59).

6. Insert two plastic guide rod 

holders (18) completely into the 

main frame (1) as shown.

Insert both guide rods (7) into the 

plastic guide rod holders (18).

3.2 

Assembly instructions

Содержание Cable Pull Station































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды