manualshive.com logo in svg

Body Solid GDCC250.1, Руководство пользователя

Поделиться
Скачать
Body Solid GDCC250.1 Скачать руководство пользователя страница 22

  22

S T E P

 8

S T E P

Be careful to assemble all components
in the sequence they are presented.

26

A.         See diagram 1. Begin at the high pulley station. Route the Lat Pulldown Cable (96) up through the first 
            opening where pulley (A1) will be installed, and out through the top. Route Cable (96) above the Top
            Frame (F) and then down through the second opening where pulley (A2) will be installed. Pull the
            entire length of cable through.

B.        See diagram 2. Insert two Pulleys (15), Pulleys (A1) and (A2), into Top Frame (F) under Cable (96)
           and attach using for each pulley:
           One 48 (M10 x65 hex head bolt)
           Two 13 (pulley spacer)
           One 56 (M10 nylon lock nut)

C.        Route Cable (96) around Pulley (A3) as shown in diagram 1 and attach Pulley (A3) to Seated Press
           Arm Support (N) as shown in diagram 2 using:
           One 46 (M10 x 185 hex head bolt)
           Two 12 (metal spacer)
           One 56 (M10 nylon lock nut)
           Two 109 (M10 washer)

D.        See diagram 1. Feed Cable (96) above Pulley (A4) -already installed. Route Cable (96) around
           Pulley (A4) and feed back between Pulley (A4) and Pulley (A6) -already installed.

E.        Route Cable (96) around Pulley (A5) as shown in diagram 1 and attach Pulley (A5)to Seated Press
           Arm Support (N) as shown in diagram 2 using:
           One 46 (M10 x 185 hex head bolt)
           Two 12 (metal spacer)
           One 56 (M10 nylon lock nut)
           Two 109 (M10 washer)

F.        See diagram 1. Feed Cable (96) back between Pulley (A4) and Pulley (A6) -already installed. Pull 
           entire length of Cable (96) through, and feed down through the hole in the small arm sticking out of
            Angled Support Frame (E).

mm

Inch

0           10          20         30          40          50         60          70         80          90         100        110       120        130       140        150

0                                1"                                2"                               3"                               4"                               5"                               6"

Lat Pulldown Cable (96)

Ball Stop End

Metal Ball End

4915  mm

16' 1.5"

NOTE:

 All pulleys in this step are 4 1/4" diameter,except where noted in Diagram 1 and Diagram 2.

                Leave all pulley bolts hand tight until Step 14 is completed.

Crossover Cable (36)

             Ball Stop End  

 

 

 

                        Cable End

      7540mm 

24’ 8 

7/8

”

S T E P

Be careful to assemble all components
in the sequence they are presented.

26

A.         See diagram 1. Begin at the high pulley station. Route the Lat Pulldown Cable (96) up through the first 
            opening where pulley (A1) will be installed, and out through the top. Route Cable (96) above the Top
            Frame (F) and then down through the second opening where pulley (A2) will be installed. Pull the
            entire length of cable through.

B.        See diagram 2. Insert two Pulleys (15), Pulleys (A1) and (A2), into Top Frame (F) under Cable (96)
           and attach using for each pulley:
           One 48 (M10 x65 hex head bolt)
           Two 13 (pulley spacer)
           One 56 (M10 nylon lock nut)

C.        Route Cable (96) around Pulley (A3) as shown in diagram 1 and attach Pulley (A3) to Seated Press
           Arm Support (N) as shown in diagram 2 using:
           One 46 (M10 x 185 hex head bolt)
           Two 12 (metal spacer)
           One 56 (M10 nylon lock nut)
           Two 109 (M10 washer)

D.        See diagram 1. Feed Cable (96) above Pulley (A4) -already installed. Route Cable (96) around
           Pulley (A4) and feed back between Pulley (A4) and Pulley (A6) -already installed.

E.        Route Cable (96) around Pulley (A5) as shown in diagram 1 and attach Pulley (A5)to Seated Press
           Arm Support (N) as shown in diagram 2 using:
           One 46 (M10 x 185 hex head bolt)
           Two 12 (metal spacer)
           One 56 (M10 nylon lock nut)
           Two 109 (M10 washer)

F.        See diagram 1. Feed Cable (96) back between Pulley (A4) and Pulley (A6) -already installed. Pull 
           entire length of Cable (96) through, and feed down through the hole in the small arm sticking out of
            Angled Support Frame (E).

mm

Inch

0           10          20         30          40          50         60          70         80          90         100        110       120        130       140        150

0                                1"                                2"                               3"                               4"                               5"                               6"

Lat Pulldown Cable (96)

Ball Stop End

Metal Ball End

4915  mm

16' 1.5"

NOTE:

 All pulleys in this step are 4 1/4" diameter,except where noted in Diagram 1 and Diagram 2.

                Leave all pulley bolts hand tight until Step 14 is completed.

S T E P

Be careful to assemble all components
in the sequence they are presented.

26

A.         See diagram 1. Begin at the high pulley station. Route the Lat Pulldown Cable (96) up through the first 
            opening where pulley (A1) will be installed, and out through the top. Route Cable (96) above the Top
            Frame (F) and then down through the second opening where pulley (A2) will be installed. Pull the
            entire length of cable through.

B.        See diagram 2. Insert two Pulleys (15), Pulleys (A1) and (A2), into Top Frame (F) under Cable (96)
           and attach using for each pulley:
           One 48 (M10 x65 hex head bolt)
           Two 13 (pulley spacer)
           One 56 (M10 nylon lock nut)

C.        Route Cable (96) around Pulley (A3) as shown in diagram 1 and attach Pulley (A3) to Seated Press
           Arm Support (N) as shown in diagram 2 using:
           One 46 (M10 x 185 hex head bolt)
           Two 12 (metal spacer)
           One 56 (M10 nylon lock nut)
           Two 109 (M10 washer)

D.        See diagram 1. Feed Cable (96) above Pulley (A4) -already installed. Route Cable (96) around
           Pulley (A4) and feed back between Pulley (A4) and Pulley (A6) -already installed.

E.        Route Cable (96) around Pulley (A5) as shown in diagram 1 and attach Pulley (A5)to Seated Press
           Arm Support (N) as shown in diagram 2 using:
           One 46 (M10 x 185 hex head bolt)
           Two 12 (metal spacer)
           One 56 (M10 nylon lock nut)
           Two 109 (M10 washer)

F.        See diagram 1. Feed Cable (96) back between Pulley (A4) and Pulley (A6) -already installed. Pull 
           entire length of Cable (96) through, and feed down through the hole in the small arm sticking out of
            Angled Support Frame (E).

mm

Inch

0           10          20         30          40          50         60          70         80          90         100        110       120        130       140        150

0                                1"                                2"                               3"                               4"                               5"                               6"

Lat Pulldown Cable (96)

Ball Stop End

Metal Ball End

4915  mm

16' 1.5"

NOTE:

 All pulleys in this step are 4 1/4" diameter,except where noted in Diagram 1 and Diagram 2.

                Leave all pulley bolts hand tight until Step 14 is completed.

S T E P

Be careful to assemble all components
in the sequence they are presented.

26

A.         See diagram 1. Begin at the high pulley station. Route the Lat Pulldown Cable (96) up through the first 
            opening where pulley (A1) will be installed, and out through the top. Route Cable (96) above the Top
            Frame (F) and then down through the second opening where pulley (A2) will be installed. Pull the
            entire length of cable through.

B.        See diagram 2. Insert two Pulleys (15), Pulleys (A1) and (A2), into Top Frame (F) under Cable (96)
           and attach using for each pulley:
           One 48 (M10 x65 hex head bolt)
           Two 13 (pulley spacer)
           One 56 (M10 nylon lock nut)

C.        Route Cable (96) around Pulley (A3) as shown in diagram 1 and attach Pulley (A3) to Seated Press
           Arm Support (N) as shown in diagram 2 using:
           One 46 (M10 x 185 hex head bolt)
           Two 12 (metal spacer)
           One 56 (M10 nylon lock nut)
           Two 109 (M10 washer)

D.        See diagram 1. Feed Cable (96) above Pulley (A4) -already installed. Route Cable (96) around
           Pulley (A4) and feed back between Pulley (A4) and Pulley (A6) -already installed.

E.        Route Cable (96) around Pulley (A5) as shown in diagram 1 and attach Pulley (A5)to Seated Press
           Arm Support (N) as shown in diagram 2 using:
           One 46 (M10 x 185 hex head bolt)
           Two 12 (metal spacer)
           One 56 (M10 nylon lock nut)
           Two 109 (M10 washer)

F.        See diagram 1. Feed Cable (96) back between Pulley (A4) and Pulley (A6) -already installed. Pull 
           entire length of Cable (96) through, and feed down through the hole in the small arm sticking out of
            Angled Support Frame (E).

mm

Inch

0           10          20         30          40          50         60          70         80          90         100        110       120        130       140        150

0                                1"                                2"                               3"                               4"                               5"                               6"

Lat Pulldown Cable (96)

Ball Stop End

Metal Ball End

4915  mm

16' 1.5"

NOTE:

 All pulleys in this step are 4 1/4" diameter,except where noted in Diagram 1 and Diagram 2.

                Leave all pulley bolts hand tight until Step 14 is completed.

Be careful to assemble all components

in the sequence they are presented.

Finger tighten all hardware in this step unless otherwise noted.

LEFT SIDE ASSEMBLY

A. 

Route the Cable End of Crossover Cable (36) from Pulley #1 up towards Pulley #2.

B. 

Bring Crossover Cable (36) around Pulley #2, towards Pulley #3, then down 

 

towards Pulley #4.

C. 

Route Crossover Cable (36) around Pulley #4, towards Pulley #5.

D. 

Bring Crossover Cable (36) around Pulley #5 and Pulley #6, then down towards 

 

Pulley #7.

E. 

Route Crossover Cable (36) around Pulley #7 and terminate on Handle (D) as 

 

shown in the diagram.

 

NOTE:  Crossover Cable (36) needs to be stripped, using a knife, before inserting it into the slot 

 

 

on Handle (D).

F. 

Once Crossover Cable (36) is stripped and inserted into Handle (D), wrench 

 

tighten the three M8x8 Allen Screws (10) to secure Crossover Cable (36).

Содержание GDCC250.1





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды