body Power BR2998, Руководство пользователя

Страница: 14 / 26

BR2998 Page 12
Assembly STEP 5
Align and attach the Pulse Handle Bar (#08) to the bracket on the
Center Post (#02) , secure them together by using two Bolts (#22) .
Clip the Pulse Handle Bar Cover (#42) onto the Center of the Pulse
Handle Bar (#08) .
Remove the Screws (#26) that are pre-assembled on back of the
Monitor (#56) and set them aside as they will be used shortly in this
step.
Connect the Monitor Wire (Upper) (#58) to the Wire on the Monitor
(#56) and connect the Pulse Sensor Wire (#57) to the back of the
Monitor (#56) .
Secure the Monitor (#56) to the bracket of the Center Post (#02) by
using four Screws (#26) that were previously removed.
Attach the Water Bottle Holder (#61) to the Center Post (#02) ,
secure them together by using two Screws (#25) .
Hardware Required
Note:
HAND PULSE SIGNAL
After assembly is completed, if the computer is not picking up your
hand pulse signal (or you are getting inaccurate readings), please refer
to our “Troubleshooting” section to resolve the issue.
#22.Bolt (M8x30 mm)
[2 pieces]
#25.Screw (M5x15 mm)
[2 pieces]
#26. Screw (M5x12 mm)
[4 pieces]