background image

BCB5280/PRO5000

Page  14

Warm-Up Instructions

1. 

Sit with your knees flexed and 

soles of feet together. 

2.  Hold your ankles and bend 

at your hips (keep your back 

straight) as you press your 

knees toward the floor with your 

elbows.

1.  Lie on your back and raise 

your right leg as you clasp both 

hands under the back of the 

knee. Keep your left leg straight. 

2.  Gently pull your right leg toward 

your trunk without  

raising your upper body. Switch 

leg positions and repeat.

1.  Sit with your left leg extended 

and bend your right leg at the 

knee as you place the sole of 

your right foot against the inner 

thigh of your extended leg. 

2.  Flex the foot of your extended 

leg (toes pointed toward  

ceiling) and gently bend forward 

from your hips; keep your back 

straight. 

3.  Reach your hands on your  

extended leg as far as possible 

and then switch legs and repeat.

1.  Assume the depicted position on your hands and knees. Stretch your 

hands out in front of you and then slowly start to pull them back in toward 

your body as you tuck your chin and arch your back upward. 

2.  Return to the starting position slowly.

1.  Sit with your leg extended and 

bend your right knee as you 

cross your right leg over your 

left leg. Your right foot of your 

extended leg foot should be flat 

on the floor alongside your left 

knee. 

2.  Place your left arm on the 

outside of your right leg and pull 

against that leg while twisting 

your trunk as far as possible to 

the right. Place your right hand 

on the floor behind your but

-

tocks. Reverse leg positions and 

repeat.

Before use, you must read and understand all instructions & warnings stated in this Owner’s Manual as well as posted 

on the equipment. Before beginning any exercise program including the following flexibility exercises, please consult with 

your physician.

The following flexibility exercises are provided to you as a means to prevent injury while you are exercising. A proper 

warm-up routine decreases the chance of injuring your muscles while you are exercising. Please take the time to do these 

flexibility exercises before and after each time you exercise.

Groin Stretch

Groin Stretch

Hamstring Stretch

Trunk Flexion, Prone

Trunk Twister

Содержание BCB5280





















Отзывы: