QUICK START MANUAL
Body Glove Inflatable Paddle Board
4
Body Glove Inflatable Kayak
(ACTUAL COLOR AND MODEL MAY VARY FROM THE BOARD YOU PURCHASED)
STEP 4 : Take the pump out and attach the hose to
the pump handle. Make sure the hose is threaded
onto the pump handle properly.
STEP 5 :
Switch the pump from Single Action (1) to
Dual Action (2) for quicker inflation of the board. In
this position the pump pushes air through the
hose during both the downward push and upward
pull.
STEP 6 :
Connect the pump hose to the board. The
valve stem should be up in the inflation position.
Always make sure there is no sand or dirt in the
end of your hose before connecting it to the valve
on the board. Sand and dirt can cause the valve to
stick / clog, causing the board to lose air.
STEP 7 : If the pump does not seem to be inflating, check hose connection with pump handle or valve.
1
2
Single Action
Dual Action
