15
FAQ - Board Repair & Maintenance
Q :
What items are in the repair kit and how do I use them?
A : The enclosed repair kit has the following items: wrench and PVC material. The wrench is used to adjust and /
or replace the valve. Tightening and replacing the valve are not routine maintenance procedures. Please contact
customer service for detailed instructions. Should your paddle board develop a tear, we have included a piece of
matching material. For small tears (less than 5.1 cm / 2 in) you can use PVC adhesive glue to affix the PVC material
over the tear. For larger tears, you should get assistance from a local marine repair shop.
A detailed protocol for repairing small tears can be found in the repair kit. Please note, glue is not included in the
repair kit. Adhesive is not included due to the relatively short shelf life of this type of glue.
Q :
When done using the paddle board, what should be done for both short-term and long-term storage?
A : After each use, inspect the paddle board, in particular the valve area, and make sure that it is clean and free of
any debris. Leaving the board inflated will not hurt the life span of the paddle board. However, the board should
be stored in an area away from direct sunlight. Remember to check the pressure (15 PSI / 1 Bar) before using. It is
recommended for extended storage (several months) that you deflate the board and store the paddle board in the
enclosed backpack.
FREQUENTLY ASKED QUESTIONS
Body Glove Inflatable Paddle Board
Body Glove Inflatable Paddle Board
Body Glove Inflatable Kayak
(ACTUAL COLOR AND MODEL MAY VARY FROM THE BOARD YOU PURCHASED)
