Body Flex Sports Body Power BST800 StepTrac, Руководство пользователя и список запчастей

Страница: 9 / 20

BST800 Page 7
Assembly STEP 1
With the help of an assistant, attach the Front Stabilizer (#16)
to the front of the Main Frame (#01) . Secure with four Bolts
(#78) , four Spring Washers (97) and four Washers (#98) .
Attach the Rear Stabilizer (#15) to the rear of the Main Frame
(#01) . secure with four Bolts (#112) , four Spring Washers (97)
and four Washers (#98) .
Attach the Front Post (#02) to the Main Frame (#01) , secure
with one Bolt (#104) , one Spring Washer (97) , one Washer
(#98) from the rear and two Screws (#111) from each side.
Attach the Left Slide Rail (#07) to the Main Frame (#01) .
Secure with two Bolts (#106) , two Arc Washers (#88) , two
Nylon Nuts (#72) from the front. And two Bolts (#112) ,
two
Repeat the above the process on the right side of the machine.
Arc Washers (#88) , two Nylon Nuts (#72) from the rear.
NOTE BEFORE STARTING THE ASSEMBLY PROCESS :
To avoid misalignment due to over-tightening, please do not use a wrench and use only hand-tightening for now to ensure
easy assembly. Wrench-tightening should be performed after all parts are assembled to ensure all nuts, bolts, and parts are tightly se
cured before use.
#78 Bolt (M8x20 mm)
#97 Spring Washer (M8)
9 pcs 9 pcs
#104 Bolt (M8x40 mm)
1 pc
#88 Arc Washer (M8)
8 pcs
#106 Bolt (M8x42 mm)
4 pcs
#112 Bolt (M8x45 mm)
8 pcs
#72 nut M8
8 pcs
#111 Screw (ST4.2x15 mm)
2 pcs
#98 Washer (M8)
Hardware Required Hardware Required Hardware Required
4 pcs