A s s e m b l y S t e p 2
Hardware Required
WIRE CONNECTIONS
Connect the
Main Sensor Wire (Middle)(#11)
to the
Main Sensor Wire (Lower) (#12).
CENTER POST ASSEMBLY
Remove the four
Bolts (#16)
, four
Spring Washers (#29)
and four
Arc Washers (#36)
that are pre-assembled on
Main Frame (#01)
and set them aside nearby as they
will be used later in this step.
Being careful not to pinch any wires, slide the
Center
Post (#02)
onto the
Main Frame(#01)
and secure it
using the previously removed four
Bolts (#16),
four
Spring Washers (#29)
, and four
Arc Washers (#36)
as shown in drawing below.
Page 7
WASHERS
BOLTS
#16. Bolt (M8x20 mm)
[4 Pieces]
#29. Spring Washer (M8)
[4 Pieces]
#36. Arc Washer (M8)
[4 Pieces]
Assembly Instructions
BR1895/2895
