Body Flex Sports BODY CHAMP BCB 5860, Руководство пользователя

Страница: 12 / 20

A s s e m b l y S t e p 6
Page 10
LOCK PIN
The
is used to place the
backrest into the
military position
quickly.
Pop-pin (#43)
Remove the
Pop-pin
(#43) for all other
positions and insert it
into the hole on the
Main Frame (#04)
when it is not in use.
C
Hardware Required
A). With the help of an assistant, insert the two pegs on the sides of the Backrest Cushion Post (#18) into the two side holes
located on the inside of both Backrest Supporting Tubes (#10) . While simultaneously holding these three pieces together,
align and slide the two holes on the bottom of the Backrest Supporting Tubes (#10) onto each side of the “welded rod” on
Main Frame (#04) . Secure by inserting one Hex Bolt (#45) through one Washer (#55) followed by one additional Washer (#55)
and one Nylon Nut (#53) . Please DO NOT OVER-TIGHTEN.
B). Insert the Arm Curl Frame (#14) into the Front Upright (#05) and secure it in place with one Knob Bolt (#38) as
illustrated below.
C). Insert the Pop-Pin (#43) into the hole on back of Main Frame (#04) for now. This Pop-Pin (#43) will allow you to adjust
seating positions for versatile workouts.
WASHER
#55. Washer (M10)
[2 Pieces]
#45. Hex Bolt (M10x140 mm)
[1 Piece]
NUT
#53. Nylon Nut (M10) [1 Pieces]
OTHERS
#38. Knob Bolt
(M10x60 mm) [1 Piece]
#43. Pop-Pin (10x105 mm)
[1 Piece]
BOLT
KNOB BOLT
The Knob Bolt (#38) is used to adjust the height
of the Arm curl pad post. Simply unscrew the
Knob bolt (#38) , reposition the height of the
Arm Curl Frame (#14) and then tighten the Knob
Bolt (#38).
A
B
“Welded Rod”
55
40
1 2 3 4
55
40
1 2 3 4
STEP3:
Assembly Instructions
BCB 5860